Black PVC Coated Solar Mesh Roll 30M (25 mm x 12.5mm) / (1″ x 1/2″)
£36.00 inc. VAT
£30.00 ex. VAT
Item width: 200mm
Item Length: 30m
Material: PVC Coated Dipped Galvanised
1-9 | £36.00 inc. VAT (30.00 ex. VAT) |
10-20 | £35.00 inc. VAT (29.17 ex. VAT) |
21-50 | £34.00 inc. VAT (28.33 ex. VAT) |
51-100 | £33.00 inc. VAT (27.50 ex. VAT) |
101+ | £32.00 inc. VAT (26.67 ex. VAT) |
Description
“Our high-quality black PVC Coated solar panel wire mesh or weld mesh is coated with durable black PVC and is specifically designed for pigeon proofing around solar panels.
If you are looking for an effective solution to prevent pigeons and other pests from getting under your solar panels, our black PVC coated wire or weld mesh is the perfect product for you. Black PVC coated wire or weld mesh measuring 30 meters in length and 200 mm wide, this wire or weld mesh is easy to cut or bend to fit the desired area.
The hole size of 25mm x 12.5mm (1″ x 1/2″)is specifically designed to keep out a variety of birds, including pigeons, sparrows, and starlings.
Our Black PVC coated wire or weld mesh made from durable 17 gauge / 1.3 mm diameter wire that has been hot dipped in galvanized material and then coated with PVC, Black PVC coated wire or weld mesh is built to last. The black PVC coating not only adds an attractive finish, but also provides extra protection against rust and other weathering.
Installing our black PVC coated wire mesh for pigeon proofing is a quick and easy process. Simply place the Bird Control Solar Panel Clips every 18 inches along the edge of the solar panel array and slide the clip onto the edge of the panel support bracket. Set the Black PVC Coated wire mesh in place and make sure the fastener rod is coming through the screen at an upward angle. Slide the speed washer onto the shaft of the Bird Control Solar Panel Clip assembly and adjust the screen as necessary. Tighten the speed washer and install the locking nut hand tight, using the threaded nut to set the correct tension.
By installing our black PVC coated wire or weld mesh, you can protect your solar panel array from pests and ensure that it is functioning at its best. Order your 30 meter roll today and enjoy the peace of mind that comes with knowing your solar panels are safe from pesky birds.
When installed properly, this wire mesh will effectively keep pigeons and other pests away from under the solar panels, ensuring that your solar panel array is functioning at its best.”
Installation guidance
This system is designed to prevent birds from getting under the solar panels, protecting the roof, wiring, and equipment from damage.
To install the wire mesh, you can follow the steps you provided:
- Cut the wire mesh into six-foot lengths and straighten it before getting onto the roof.
- Use a length of 2 X 4 timber to bend up the bottom inch of the mesh to about 30 degrees, creating a “kick-out” that helps to lock the mesh firmly in place.
- On a typical solar panel, use three solar panel pigeon proofing clips on each long edge of the wire mesh and two clips on each short edge. Refer to the attached diagram for more details and an example of a typical installation.
- Secure the wire mesh to the solar panels using the patent-pending clips.
This non-penetrating system is fast and easy to install and can be removed for servicing if needed. It is suitable for use on rooftop solar panel arrays and can handle all levels of bird pressure. By using this wire mesh and solar panel clip system, you can protect your solar panel array from birds and ensure that it is functioning at its best. Please see the attached installation images for more details.
Aadarsh (verified owner) –
Very well worth the money.
Nicholas (verified owner) –
Good quality.
Jackson (verified owner) –
Very well worth the money.
John (verified owner) –
The product is firmly packed.
Liam (verified owner) –
Good quality.